Online Message

Message

    Product List

    Hot News

Lepidolite ultrafine powder mill

Products overview

Lepidolite ultrafine powder mill , which is designed by our engineers and technicians on the basis of multiple innovation, test and experience over two decades, has absorbed many advantages of home and

  •  Lepidolite ultrafine powder mill,  which is designed by our engineers and technicians on the basis of multiple innovation, test and experience over two decades, has absorbed many advantages of home and abroad mill manufacturing technique. It has been proved by thousands of customers that our machine has outstanding features and stable quality. Lepidolite ultrafine powder mill can upgrade its production and the additional value which is suitable for our customer to use. It is the ideal equipment for fine milling. 

     

    Working Principle of lepidolite ultrafine powder mill:

    ●The crusher will crush the big materials into small ones, and then the elevator will send them to the hopper.

    ●The vibrating feeder will send the materials to the middle of first dial evenly.

    ●The motor of main equipment drives the main shaft and dial through reducer, and the dial drives numbers of rollers moving in the ring channels via pins.

    ●The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings.

    ●The high pressure centrifugal blower will inhale air from outside and bring the crushed materials to classifier.

    ●The rotating turbo in the powder collector will make the coarse materials return to the mill and regrounded, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it.

    ●The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

    Features of  lepidolite ultrafine powder mill:
    ● High Efficiency 
    Under the same finished final size and the same motor power, the capacity of Fine roller mill is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.
    ● Long lifecycle of spare parts
    The ring and roller are forged by special material with high utilization. Under the same grinding material and finish special size, the lifecycle of spare parts is about one year, which is 2-3 times longer than impact mill or turbo mill. Furthermore, the lifetime can reach 2-5 years for grinding calcite carbonate.
    ● High safety and reliability
    As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.
    ● High fineness, flexible adjustment
    The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97≤5μm.
    ●Environment-friendly 
    The application of pulse bag filter and muffler greatly alleviates dust pollution and noise.
    ●Advanced intelligent speed control device
    Convenient adjusting, more uniform particle size.
                       
    If you want to know more about lepidolite ultrafine powder mill, pls contact us.